Wipers
Filter Your Search
Category Group
Material
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.
Buna-N Material | 1 1/4 in Nominal Inner Diameter
Features
- Installed in hydraulic cylinders to prevent dirt, dust, and moistures
- Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components
Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.
Buna-N Material | 1 in Nominal Inner Diameter
Features
- Installed in hydraulic cylinders to prevent dirt, dust, and moistures
- Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components
Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.
Buna-N Material | 2 3/8 in Nominal Inner Diameter
Features
- Installed in hydraulic cylinders to prevent dirt, dust, and moistures
- Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components
Two-piece, single acting wiper which consists of a PTFE ring and an o-ring energizer. This unique style provides low friction, free of stick-slip, and a high sliding speed.
Two-piece, single acting wiper which consists of a PTFE ring and an o-ring energizer. This unique style provides low friction, free of stick-slip, and a high sliding speed.
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 1/2 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 15/16 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F
