Wipers
Filter Your Search
Shop by Category
The ST-XLFT was developed for hard environments, particularly longwall mining. These wipers include a dust lip to prevent contaminates from entering through the groove. They also have a ribbed inside diameter for low friction operation and to prevent pressure traps between the wiper and rod seal.
93A Durometer | Urethane Material | 3 5/8 in Nominal Inner Diameter
Features
- Include a dust lip to prevent contaminates from entering through the groove
- Ribbed inside diameter for low friction operation
- Prevent pressure traps between the wiper and rod seal
Rubber Material | 1 1/2 in Nominal Inner Diameter | Wiper
Rubber Material | 1 1/2 in Nominal Inner Diameter | Wiper
Utilizing a double lip of nitrile bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
80A Durometer | Nitrile Material | 50 MM Nominal Inner Diameter | Wiper
Molded in urethane with a steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.
Urethane Material | 60 MM Nominal Inner Diameter | Dust Seal
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
Nitrile Material | 22 MM Nominal Inner Diameter | Wiper
Style ST-XL-PM wipers are molded from 55D polyester and are direct replacements for Style “ST”, “ST-XL” or “D” wipers. The polyester based material provides a tough abrasion resistant wiper for heavy contaminant environments. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
55D Durometer | Polyester Material | 2 in Nominal Inner Diameter
Features
- Molded from 55D polyester
- The outside diameter of the ring has a crush lip providing extra interference in the groove
- The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal
Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
Urethane Material | 40 MM Inner Diameter | Wiper
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
92A Durometer | Urethane Material | 3 1/2 in Nominal Inner Diameter
Features
- Used in Heavy Duty U-seals
- Capable of surviving hostile environments
- Molded from the high performance urethane
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
Urethane Material | 30 MM Inner Diameter | Wiper