Wipers
Filter Your Search
Category Group
Material
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Cadmium plated with gold chromate to QQL-614 and are inspected for required radial pressure, breakout friction, and rod light-tightness per spec. Manufactured to the MS28776 specification in accordance with the MIL-S-5049 procurement standard.
AM scrapers are typically used in heavy duty hydraulics like aircraft landing gear and steel mill cylinders.
Seal Options
- Solid scraping body only
- Scraping body with a narrow groove accommodating a serpentine form spring to scraping load
- Scraping body with a wide groove in the outside diameter accommodating two “c” style springs (resembling split washers) to generate scraping load
Cadmium plated with gold chromate to QQL-614 and are inspected for required radial pressure, breakout friction, and rod light-tightness per spec. Manufactured to the MS28776 specification in accordance with the MIL-S-5049 procurement standard.
AM scrapers are typically used in heavy duty hydraulics like aircraft landing gear and steel mill cylinders.
Seal Options
- Solid scraping body only
- Scraping body with a narrow groove accommodating a serpentine form spring to scraping load
- Scraping body with a wide groove in the outside diameter accommodating two “c” style springs (resembling split washers) to generate scraping load
Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 1/2 in Nominal Inner Diameter
Features
- Slotted heel design
- Slots in the heel allow excess hydraulic fluid to bypass the wiper
Style AN-M2 scrapers conform to MS28776-M2 sizes and are manufactured in brass. The scrapers are suitable for extreme environments with aggressive contaminants. The unique spring-loaded construction and ductile material result in close rod contact even when coping with rod ovality and helix grinding patterns.
Brass Material | 5/8 in Nominal Inner Diameter
Features
- Scrapers are suitable for extreme environments with aggressive contaminants
- Unique spring-loaded construction
- Manufactured in brass
AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 3/4 in Nominal Inner Diameter
Features
- Flexible, snap-in design for easy installation into closed housings
- Low compression set
Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 3/4 in Nominal Inner Diameter
Features
- Slotted heel design
- Slots in the heel allow excess hydraulic fluid to bypass the wiper
Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 13/16 in Nominal Inner Diameter
Features
- Slotted heel design
- Slots in the heel allow excess hydraulic fluid to bypass the wiper
RW, 1 X 1.274 X .107 AN WIPER HNBR
AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems.
AN wipers will retrofit into glands prescribed in MS-33675 for corresponding dash numbers of MS-28776.
- Flexible, snap-in design for easy installation into closed housings
- Low compression set
