Wipers

RWAN, 5 1/2 X 5.929 X .138 AN Wiper HNBR

DA102-HNBR-146.05 X 158.75 X 3.99

RWA, 6.500 AN Brass Cad Plated Wiper

RWA, 8.000 AN Brass Cad Plated Wiper

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 10 1/2 in Nominal Inner Diameter

Features

• Flexible, snap-in design for easy installation into closed housings
• Low compression set

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 11 in Nominal Inner Diameter

Features

• Flexible, snap-in design for easy installation into closed housings
• Low compression set

RWA, 11.000 AN Brass Cad Plated Wiper

Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 9 1/4 in Nominal Inner Diameter

Features

• Slotted heel design
• Slots in the heel allow excess hydraulic fluid to bypass the wiper

Two-piece, single acting wiper which consists of a PTFE ring and an o-ring energizer. This unique style provides low friction, free of stick-slip, and a high sliding speed.

Two-piece, single acting wiper which consists of a PTFE ring and an o-ring energizer. This unique style provides low friction, free of stick-slip, and a high sliding speed.