Wipers

MSWXE-T is a two piece single acting wiper which consists of a PTFE ring and an O-Ring energizer. This unique style provides low friction, free stick-slip, and a high sliding speed.

PTFE/NBR Material | 85 MM Nominal Inner Diameter | Wiper

MSWXE-T is a two piece single acting wiper which consists of a PTFE ring and an O-Ring energizer. This unique style provides low friction, free stick-slip, and a high sliding speed.

PTFE/NBR Material | 90 MM Inner Diameter | Wiper

Molded in nitrile, this double lipped wiper is common in Toyota lift trucks.

Nitrile Material | 105 MM Inner Diameter | Wiper

Molded in nitrile, this double lipped wiper is common in Toyota lift trucks.

Nitrile Material | 110 MM Inner Diameter | Wiper

Molded in nitrile, this double lipped wiper is common in Toyota lift trucks.

Nitrile Material | 115 MM Inner Diameter | Wiper

Molded in nitrile, this double lipped wiper is common in Toyota lift trucks.

Nitrile Material | 125 MM Inner Diameter | Wiper

Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.

90A Durometer | Urethane Material | 10 in Nominal Inner Diameter

Features

• Flexible enough to snap into a groove
• Wipers are constructed of fluorocarbon

Single-lipped, snap-in rod wiper is designed to fit D-style housings.

The ST-XLF wipers are designed to fit the standard ST wiper groove. These wipers include a dust lip to prevent contaminates from entering through the groove. They also have a ribbed inside diameter for low friction operation and to prevent pressure traps between the wiper and rod seal. Developed specifically for use in harsher environments with heavy contamination, such as in agriculture, off-highway, and forestry equipment.

Urethane Material | 1 1/8 in Nominal Inner Diameter

Features

• Precision trimmed wiping lip
• Retrofits most ‘D’ wiper housings
• Especially effective in vertically mounted cylinders
• Designed to follow the rod deflection caused by side loads
• Interchangeable with Hallite 520 wiper
• Sharp wiping lip scrapes heavy contamination from rod protecting sealing system
• Umbrella Wiper Technology™ protects housing from contamination and reduces moisture ingress

Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.

90A Durometer | Fluorocarbon Material | 1 1/8 in Nominal Inner Diameter

Features

• Flexible enough to snap into a groove
• Wipers are constructed of fluorocarbon

Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.

90A Durometer | Urethane Material | 12 1/2 in Nominal Inner Diameter

Features

• Flexible enough to snap into a groove
• Wipers are constructed of fluorocarbon