Piston Seals

Specifically designed as piston seals, these u-seals are engineered to seal on their outside diameter. They offer extended, service life and maximum reliability in piston sealing.

92A Durometer | Urethane Material | 5 in Nominal Inner Diameter | 1/2 in Cross Section | U-Seal

This capped piston seal consists of a filled PTFE cap, a T-shaped NBR energizer, and two split nylon backup rings. It exhibits low friction, high sealability, and excellent resistance to extrusion and wear.

PTFE Material | 55 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

This capped piston seal consists of a filled PTFE cap, a T-shaped NBR energizer, and two split nylon backup rings. It exhibits low friction, high sealability, and excellent resistance to extrusion and wear.

PTFE Material | 63 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.

97A; 70A Durometer | Urethane Material | 17.5 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.

97A; 70A Durometer | Urethane Material | 49.5 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.

97A; 70A Durometer | Urethane Material | 59.5 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.

70A Durometer | PTFE Material | 169 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.

70A Durometer | PTFE Material | 55.9 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The MPS2000 double acting piston seal is designed for heavy duty hydraulic applications. The small profile is resistant to shock loads and has high abrasion and extrusion resistance. Its split design allows simple installation on a solid piston.

Nylon Material | 129 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.

70A Durometer | NBR Material | 66 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities