Piston Seals
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 128 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 133 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
MPSA-PDE is a double-acting piston seal designed for use on split pistons where severe vibration, shock, and high pressure exist. It consists of an NBR sealing element, two plastic support rings, and two acetal bearing rings.
Nitrile Plastic POM Material | 135 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 140 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 130 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 135 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 140 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 158 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 163 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 165 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
