Piston Seals
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
The MPSU300 is a compact, double-acting piston seal consisting of two parts: a urethane sealing ring with a pronounced sealing edge and a rectangular nitrile energizer to prevent the seal from twisting within the groove. It also has low friction and smooth operating movement even at low linear velocities.
94A; 70/80A Durometer | Urethane Material | 34.5 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The MPSU300 is a compact, double-acting piston seal consisting of two parts: a urethane sealing ring with a pronounced sealing edge and a rectangular nitrile energizer to prevent the seal from twisting within the groove. It also has low friction and smooth operating movement even at low linear velocities.
94A; 70/80A Durometer | Urethane Material | 39 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The MPSU300 is a compact, double-acting piston seal consisting of two parts: a urethane sealing ring with a pronounced sealing edge and a rectangular nitrile energizer to prevent the seal from twisting within the groove. It also has low friction and smooth operating movement even at low linear velocities.
94A; 70/80A Durometer | Urethane Material | 39.5 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The MPSU300 is a compact, double-acting piston seal consisting of two parts: a urethane sealing ring with a pronounced sealing edge and a rectangular nitrile energizer to prevent the seal from twisting within the groove. It also has low friction and smooth operating movement even at low linear velocities.
94A; 70/80A Durometer | Urethane Material | 59 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The MPSU300 is a compact, double-acting piston seal consisting of two parts: a urethane sealing ring with a pronounced sealing edge and a rectangular nitrile energizer to prevent the seal from twisting within the groove. It also has low friction and smooth operating movement even at low linear velocities.
94A; 70/80A Durometer | Urethane Material | 69.5 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The MPSU300 is a compact, double-acting piston seal consisting of two parts: a urethane sealing ring with a pronounced sealing edge and a rectangular nitrile energizer to prevent the seal from twisting within the groove. It also has low friction and smooth operating movement even at low linear velocities.
94A; 70/80A Durometer | Urethane Material | 79.5 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
This four piece double acting piston seal contains a nitrile energizer behind a tough, wear-resistant 55D thermoplastic polyester elastomer (TPE) cap ring. It also includes two split rectangular polyacetal anti-extrusion rings. The MTPS design has high shock load and high pressure capabilities and is suitable for both roller-burnished and honed tubing. Sealing materials are suitable for mineral oils and HFA (High Water Content) fluids as used in longwall mining equipment.
55D Durometer | TPE; Nitrile; Polyacetal Material | 150 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1400 seals offer low friction and high strength in a compact double-acting piston seal design. The PTFE seal ring, combined with a rubber energizer, assures positive contact with the dynamic surface. The PS1400 is designed to fit ANSI/B93.32-1973 groove standards. Piston diameter “I” dimensions are given for pistons without wear rings.
15% Glass Filled PTFE Material | 2.733 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1400 seals offer low friction and high strength in a compact double-acting piston seal design. The PTFE seal ring, combined with a rubber energizer, assures positive contact with the dynamic surface. The PS1400 is designed to fit ANSI/B93.32-1973 groove standards. Piston diameter “I” dimensions are given for pistons without wear rings.
15% Glass Filled PTFE Material | 4.008 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
