Piston Seals

Some PS2000 piston seals utilize a round instead of a square energizer. Also, piston diameter “I” dimensions are given for pistons without wear rings. Many sizes shown are completely interchangeable with style PS914 piston seals.

Glass Filled Nylon Material | 3.908 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Some PS2000 piston seals utilize a round instead of a square energizer. Also, piston diameter “I” dimensions are given for pistons without wear rings. Many sizes shown are completely interchangeable with style PS914 piston seals.

Glass Filled Nylon Material | 4.408 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Some PS2000 piston seals utilize a round instead of a square energizer. Also, piston diameter “I” dimensions are given for pistons without wear rings. Many sizes shown are completely interchangeable with style PS914 piston seals.

Glass Filled Nylon Material | 4.908 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Some PS2000 piston seals utilize a round instead of a square energizer. Also, piston diameter “I” dimensions are given for pistons without wear rings. Many sizes shown are completely interchangeable with style PS914 piston seals.

Glass Filled Nylon Material | 6.24 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Some PS2000 piston seals utilize a round instead of a square energizer. Also, piston diameter “I” dimensions are given for pistons without wear rings. Many sizes shown are completely interchangeable with style PS914 piston seals.

Glass Filled Nylon Material | 4.74 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

This seal, molded from high grade 55D polyurethane, may retrofit the PS1800 seals, considering all dimensions are comparable. This seal material, with a high degree of memory, stretches over the piston and snaps in the groove for immediate assembly. These seals also feature low friction and high abrasion and extrusion resistance which helps to eliminate assembly damage. Piston diameter “I” dimensions are given for pistons without wear rings.

55D Durometer | Glass/PTFE Filled Polyurethane Material | 8.137 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

This two piece piston seal design comes made with a new high grade fiberglass filled polyamide step-cut ring along with a rectangular shore A 70 NBR energizer. This product offers extreme strength and resistance to extrusion, a very high resistance to abrasion, and ease of installation thanks to the step cut design and chamfered edges. It also offers greater resistance to surface roughness in comparison to any elastomer seals. The rectangular contact pressure points produce consistently high pre-loading forces and high protection from twisting within the housing. ISO 7425-1 compliant.

70 Shore A Durometer | Glass Filled Nylon Material | 4.24 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

2.750 X 2.212 X 0.282 Step Cut PS

5.250 X 4.490 X 0.375 Step Cut PS

6.500 X 5.740 X 0.375 Step Cut PS