Piston Seals
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
This style of seal provides effective static and dynamic sealing while the groove on the sealing surface acts as a lubrication reservoir to reduce friction. Grooves on both sides prevent blow by during sudden pressure changes and a premium NBR square energizer prevents twisting. This product is molded from premium urethane which provides excellent extrusion and wear resistance.
98A Durometer | Urethane Material | 2 5/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
This style of seal provides effective static and dynamic sealing while the groove on the sealing surface acts as a lubrication reservoir to reduce friction. Grooves on both sides prevent blow by during sudden pressure changes and a premium NBR square energizer prevents twisting. This product is molded from premium urethane which provides excellent extrusion and wear resistance.
98A Durometer | Urethane Material | 3 7/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
These piston seals provide bi-directional, low friction sealing with increased stability and superior leakage control. The square cut energizer provides low pressure sealing and eliminates backside leakage. This seal also effectively seals between different fluids on each side of the piston seal, making gas/liquid sealing combinations possible. Piston diameter “I” dimensions are given for pistons without wear rings.
40% Bronze Filled PTFE Material | 4.91 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.
60D & 57A Durometer | Urethane Composite Material | 2 1/2 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.
60D & 57A Durometer | Urethane Composite Material | 3 1/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.
60D & 57A Durometer | Urethane Composite Material | 3 1/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.
60D & 57A Durometer | Urethane Composite Material | 4 1/2 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.
Buna-N Rubber Material | 5/8 in Nominal Inner Diameter | Piston T-Seal
The Style TP-L seal is a zero drift piston seal for bi-directional pressure applications. The locking anti-extrusion rings provide for an easier installation. It is designed to retrofit O-Ring and standard T-seal grooves. The 70 Shore A NBR is designed specifically for performance in compression type dynamic seals. Other features include a net molded dynamic sealing surface and backup chamfers.
70 Shore A Durometer | Buna-N Rubber Material | 5/8 in Nominal Inner Diameter | Piston T-Seal
